Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

MFDeploy Hangs on Network Configuration


  • Please log in to reply
2 replies to this topic

#1 wjousts

wjousts

    Member

  • Members
  • PipPip
  • 22 posts

Posted 29 August 2011 - 01:41 PM

I just got the Netduino plus board and I opened up MFDeploy to try and configure the network. However, when I got to Target -> Configuration -> Network, the MFDeploy program just hangs and nothing happens. The on-board LED lights on the Netduino board and then goes out after a while, but the MFDeploy app fails to respond. Only when I disconnect the USB cable does it come up with an error message "Device had old or unsupported configuration". What gives?

#2 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 29 August 2011 - 03:02 PM

Hi wjousts, This appears to be a driver or .NET Micro Framework SDK issue. Can you post a bug report over at netmf.codeplex.com? The .NET Micro Framework 4.2 core tech team is finishing up the annual .NET MF 4.2 release in the next two weeks... In the meantime, a few ideas: 1. If you try this on another PC, does that work well for you? 2. If you press and hold the pushbutton while plugging the Netduino Plus into your PC, are you then able to set the Network Configuration alright (in bootloader mode)? Chris

#3 wjousts

wjousts

    Member

  • Members
  • PipPip
  • 22 posts

Posted 29 August 2011 - 03:17 PM

Hi wjousts,

This appears to be a driver or .NET Micro Framework SDK issue. Can you post a bug report over at netmf.codeplex.com? The .NET Micro Framework 4.2 core tech team is finishing up the annual .NET MF 4.2 release in the next two weeks...

In the meantime, a few ideas:
1. If you try this on another PC, does that work well for you?
2. If you press and hold the pushbutton while plugging the Netduino Plus into your PC, are you then able to set the Network Configuration alright (in bootloader mode)?

Chris


It seems to work if I hold the button down. Thanks.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.