Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

Fails Ping with MFdeploy right out of the box


  • Please log in to reply
3 replies to this topic

#1 tel001

tel001

    Member

  • Members
  • PipPip
  • 13 posts
  • LocationVancouver BC

Posted 07 August 2011 - 11:15 PM

-MFdeploy finds it on USB as NetduinoPlus_NetduinoPlus -Under Device Manager->USB Controllers it IDs as Netduino...Device is Working properly -I did a remove the add driver -Reset process seems to be OK and the Network lights flash on boot like they should I have Flashed devices in the past so I'm willing to try, but even MFdeploy won't connect to allow me to try that :-) I assume there's a backdoor way to re-flash it? I'm doing a Widows Update on my Vista 32 bit machine ... But I can format and put XP on a machine if that would help. Thanks for your help. Attached is a screen capture of my settings....

Attached Files



#2 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 08 August 2011 - 12:28 AM

Hi tel000, If you hold down the pushbutton while plugging in your Netduino, it will put it into "bootloader" mode for about 5 seconds. Really quick...try doing this, and then immediately press PING from MFDeploy. Can it see the Netduino Plus now? Chris

#3 tel001

tel001

    Member

  • Members
  • PipPip
  • 13 posts
  • LocationVancouver BC

Posted 08 August 2011 - 05:01 AM

Hi tel000,

If you hold down the pushbutton while plugging in your Netduino, it will put it into "bootloader" mode for about 5 seconds.

Really quick...try doing this, and then immediately press PING from MFDeploy. Can it see the Netduino Plus now?

Chris

Hi Chris.

Thanks for that...I'm running windows downgrader and dumping my messy Vista for now...
I'll do that once I have a clean machine :blink:

#4 tel001

tel001

    Member

  • Members
  • PipPip
  • 13 posts
  • LocationVancouver BC

Posted 08 August 2011 - 09:46 AM

I'm now running XP with all the current Updates...Hm Blinky is Blinkin fine :blink: Now the netdiction sets in! :-))))




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.