Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

Netduino Plus Firmware v4.2.0 RC1


  • Please log in to reply
33 replies to this topic

#1 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 07 August 2011 - 05:29 PM

This post replaced by Netduino v4.2 RC3 firmware

#2 Dan T

Dan T

    Advanced Member

  • Members
  • PipPipPip
  • 91 posts
  • LocationBoston (Greater)

Posted 07 August 2011 - 05:43 PM

Version: 4.2.0 RELEASE CANDIDATE (version 4.2.0.0 RC1)
This firmware includes the following updates:
7. Dozens of bugfixes

Thanks! I'll let you know if this fixes my networking probs...

#3 Dan T

Dan T

    Advanced Member

  • Members
  • PipPipPip
  • 91 posts
  • LocationBoston (Greater)

Posted 07 August 2011 - 06:36 PM

Thanks! I'll let you know if this fixes my networking probs...

It didn't. Still can't see the network. I'll take this up in another thread.

But... It does seem to deploy VERY smoothly. And repeatedly. The one time I unplugged the USB was in a hopeful (desperate) attempt to get network access... Then deploy got stuck... then I hit Netduino's reset... then a small BSOD happened and my machine rebooted. Hmm. I'll try to repro that when I have more time and more courage.

Let me focus on the positive here: THIS FIRMWARE SEEMS TO DEPLOY MY CODE VERY SMOOTHLY AND REPEATEDLY.

#4 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 07 August 2011 - 08:11 PM

Hi Dan T, So...improvement :) On the network issue, can you file an official bug report ("issue") on that over on netmf.codeplex.com? State that you're using the SAM7X chip and it isn't working on your 10Mbps router (although it works on your 100Mbps router). I'd give them the model # too just in case... If you can post a link to that here, we'll take a glance to see if there's an obvious issue...perhaps in the PHY init code or MAC code from the .NET MF PK... Chris

#5 Valkyrie-MT

Valkyrie-MT

    Advanced Member

  • Members
  • PipPipPip
  • 315 posts
  • LocationIndiana, USA

Posted 07 August 2011 - 08:41 PM

It didn't. Still can't see the network...


If you submit an issue on codeplex, it'd be tough for the developers to figure out the difference between these 2 routers without buying them and trying to reproduce... You might want to consider using Wireshark to record the network traffic between Netduino and router A, then Netduino and Router B, and send them (or attach to the Codeplex issue) the PCAP (wireshark log) file. Also, you might be able to compare the traffic and see the difference... Then the developers know exactly where to focus their effort.

Two cents...

-Valkyrie-MT

#6 Robert L.

Robert L.

    Advanced Member

  • Members
  • PipPipPip
  • 100 posts

Posted 08 August 2011 - 10:39 AM

I installed this new version last night, the upgrade went smoothly... :) I thought that this version was to include support for reading & writing on-board flash as well as support for Cryptography functions, such as RSA. 1) Where can I look for native flash reading/writing? Is there an example available? 2) Microsoft.Spot.Native seems to include Microsoft.SPOT.Cryptography. Any chance of getting an example of how to use this code? Can you confirm that this is available in 4.2? In the book "Expert .NET Micro Framework", it says that the keys are stored in different formats and the cipher data uses a different byte order compared with the "Full .NET" Framework. A note on Microsoft's web site seems to indicate the cipher data is in reverse order, IE swapped left to right. I plan to use the Netduino to transfer encoded RSA messages to/from a web site using PHP's gmp class.

#7 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 08 August 2011 - 07:16 PM

Hi Robert, .NET MF 4.2 added both of these new features, but both of them are traditionally targeted for modules with several megabytes of Flash/RAM. We have created a managed code AES implementation, and it's quite possible to do crypto with your Netduino. But the remote reflashing via Microbooter probably won't fit. Chris

#8 Robert L.

Robert L.

    Advanced Member

  • Members
  • PipPipPip
  • 100 posts

Posted 09 August 2011 - 12:33 AM

Hi Robert,

.NET MF 4.2 added both of these new features, but both of them are traditionally targeted for modules with several megabytes of Flash/RAM.

We have created a managed code AES implementation, and it's quite possible to do crypto with your Netduino. But the remote reflashing via Microbooter probably won't fit.

Chris



Hi Chris, thanks for the quick reply. Let me clarify my need for reading and writing the embedded FLASH. I am not wanting to update the programming code, (IE make software changes) what I want to do is use a small area of FLASH (say around 4K) to store variables and parameters that would survive power cycles. I believe this can be done with an SD card, but I wonder if the native FLASH can be updated by code running on the ARM processor.

Regarding RSA, I see that 4.1 version of Microsoft.SPOT.Native includes Microsoft.SPOT.Cryptography while 4.2 RC1 does not. Is this still to come, or have I made some error in the install or my understanding?

Thanks,
Robert

#9 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 09 August 2011 - 12:39 AM

Hi Chris, thanks for the quick reply. Let me clarify my need for reading and writing the embedded FLASH. I am not wanting to update the programming code, (IE make software changes) what I want to do is use a small area of FLASH (say around 4K) to store variables and parameters that would survive power cycles. I believe this can be done with an SD card, but I wonder if the native FLASH can be updated by code running on the ARM processor.

Oh sorry, I misunderstood. That's another new feature! :) It's called "simple storage."

We're evaluating simple storage, and it looks like we'll be able to enable about 8KB of flash storage on the chip. I don't want to promise anything until we're done with the code (and we know it will fit for sure--right now code space is super tight on Netduino Plus with all the .NET MF 4.2 extras), but it's one of the first features we'll be adding after 4.2 is released.

Chris

#10 elettrozero

elettrozero

    Advanced Member

  • Members
  • PipPipPip
  • 58 posts

Posted 10 August 2011 - 07:59 AM

Version: 4.2.0 RELEASE CANDIDATE (version 4.2.0.0 RC1)

5. IP broadcast support


Hi, what does it mean "IP broadcast" ?

#11 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 11 August 2011 - 02:02 AM

Hi, what does it mean "IP broadcast" ?

The RC1 update has bugfixes to enhance compatibility with UDP broadcast packets. There may be some glitches to work out still...not sure.

Chris

#12 Scott Green

Scott Green

    Advanced Member

  • Members
  • PipPipPip
  • 34 posts

Posted 11 August 2011 - 02:24 AM

Sorry if this has been asked elsewhere, but is OneWire support included in 4.2.0 RC1 Scott...

#13 Stavros Tekes

Stavros Tekes

    Member

  • Members
  • PipPip
  • 17 posts
  • LocationThessaloniki, Greece

Posted 11 August 2011 - 10:22 AM

Chris do you think that with the 50% patch, will the 4.2 RC1 release more ram in the netduino plus?
Stavros

#14 Valkyrie-MT

Valkyrie-MT

    Advanced Member

  • Members
  • PipPipPip
  • 315 posts
  • LocationIndiana, USA

Posted 11 August 2011 - 04:53 PM

Sorry if this has been asked elsewhere, but is OneWire support included in 4.2.0 RC1


OneWire support is NOT in 4.2 RC1, but Chris has previously promised a special OneWire build after the final release of 4.2. So, it's coming.

-Valkyrie-MT

#15 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 12 August 2011 - 01:04 AM

OneWire support is NOT in 4.2 RC1, but Chris has previously promised a special OneWire build after the final release of 4.2. So, it's coming.

Yup! I'm not sure if OneWire will fit in the standard firmware--but we will definitely make a special build!

Chris

#16 oritpro

oritpro

    New Member

  • Members
  • Pip
  • 4 posts
  • LocationPortland, OR

Posted 12 August 2011 - 02:15 AM

Hi, what does it mean "IP broadcast" ?


Let's say your network device has an IP address of 192.168.1.1/24 (24=255.255.255.0). The broadcast IP for that subnet is: 192.168.1.255

That's called a subnet directed broadcast.

There's another type of broadcast that looks like this: 255.255.255.255

That's called a zero net or global broadcast.

Broadcasts are used to send messages all devices on the same subnet or network at the same time.

#17 Valkyrie-MT

Valkyrie-MT

    Advanced Member

  • Members
  • PipPipPip
  • 315 posts
  • LocationIndiana, USA

Posted 13 August 2011 - 03:42 AM

When can we get the firmware source for this? I assume this was built with RVDS 4.0? -Valkyrie-MT

#18 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 13 August 2011 - 04:08 AM

Hi Valkyrie, Working on uploading it to CodePlex. Should be live sometime in the next few days :) [Fabien and Bertrand have been making the CodePlex site work...more on that soon.] Chris

#19 James

James

    Advanced Member

  • Members
  • PipPipPip
  • 56 posts

Posted 15 August 2011 - 07:01 PM

Thanks for adding IP Broadcast support!!

#20 elettrozero

elettrozero

    Advanced Member

  • Members
  • PipPipPip
  • 58 posts

Posted 21 August 2011 - 01:52 PM

Let's say your network device has an IP address of 192.168.1.1/24 (24=255.255.255.0). The broadcast IP for that subnet is: 192.168.1.255

That's called a subnet directed broadcast.

There's another type of broadcast that looks like this: 255.255.255.255

That's called a zero net or global broadcast.

Broadcasts are used to send messages all devices on the same subnet or network at the same time.


Well...does it really work with this firmware ?




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.