"An error has occurred: please check your hardware"
#21
Posted 20 April 2014 - 05:40 PM
It looks like your board is stuck in bootloader mode.
Grab a copy of Netduino Update (which comes with the latest Netduino firmware--currently 4.3.1). Use it to update your Netduino Plus 2's firmware and let us know if that gets you up and running.
Welcome to the Netduino community,
Chris
#22
Posted 20 April 2014 - 08:54 PM
Hi Chris,
Thank you for your reply!
Whew! Ok, so with you guidance and the Info you provide on updating the firmware I was able to the the NetDuino back on its feet so to speak.
The app continued to give the same error and I tried changing the target .Net Framework to 4.2 and then back to 4.3, rebooting etc. But the error persisted.
New projects targeting 4.3 would work. So I simply ported over the code from the earlier projects.
I'm guessing this is something that can be fixed, in that there is an assumption somewhere that expects a certain condition to be a hardware issue when in fact it may not be?
Things are back to working and I'm having a blast! Thank you.
Regards
Shiv.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users