Can't execute Blinky project
#1
Posted 25 August 2010 - 02:07 AM
#2
Posted 25 August 2010 - 03:10 AM
#3
Posted 26 August 2010 - 01:30 AM
#4
Posted 26 August 2010 - 01:36 AM
#5
Posted 26 August 2010 - 07:11 AM
#6
Posted 27 August 2010 - 12:01 AM
#7
Posted 27 August 2010 - 12:17 AM
Chris;
I updated the firmware successfully. Previously, during power up, the user led came on for a second or two then turned off. Now it stays on continuously.
I can not deploy the Blinky program or any empty Netduino apps to the device -- VS remains in the 'preparing to deploy state'.
Davis
If your LED is not turning off, you're stuck in TinyBooter (the bootloader). Restart your computer and just plug in your Netduino. Does the blue LED turn off after a few seconds? If not, then the firmware wasn't flashed correctly for some reason. Just reflash it, and it should come back to life.
Chris
#8
Posted 27 August 2010 - 02:50 AM
#9
Posted 27 August 2010 - 03:09 AM
It finally worked. Thanks.
Superb. Glad it's working for you!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users