Hi all, total noob here, sorry for the following question...
Is it possible to "Stack" these boards on top of each other and communicate between boards?
communicate between boards
Started by ScottyG, May 24 2011 03:17 AM
1 reply to this topic
#2
Stefan
-
- Members
-
- 1965 posts
Moderator
- LocationBreda, the Netherlands
Posted 24 May 2011 - 06:31 AM
Hi Scotty,
Welcome to the Netduino community!
Which boards do you want to stack? Shields can stack on top of the Netduino, and they can work together if the pins don't interfear. But multiple Netduinos can't stack.
It is possible though, to link multiple netduinos, for example by using a serial port. You need to link pin 0 and pin 1 to the other netduino pin 1 and pin 0 (crossed). Then you can use the SerialPort class to do the rest.
Welcome to the Netduino community!
Which boards do you want to stack? Shields can stack on top of the Netduino, and they can work together if the pins don't interfear. But multiple Netduinos can't stack.
It is possible though, to link multiple netduinos, for example by using a serial port. You need to link pin 0 and pin 1 to the other netduino pin 1 and pin 0 (crossed). Then you can use the SerialPort class to do the rest.
- Inquisitor likes this
"Fact that I'm a moderator doesn't make me an expert in things." Stefan, the eternal newb!
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
