Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

Netduino Plus 1 Firmware v4.1.1 BETA 1


  • Please log in to reply
45 replies to this topic

#41 Yeison

Yeison

    New Member

  • Members
  • Pip
  • 5 posts

Posted 14 November 2012 - 04:18 PM

help No harm if my netduino, when I connect I get what you do not recognize the device. And when I connect MFDeploy appears: connecting to ... Failure - Device is invalid or not responding. attached images. Thank you.

Attached Files



#42 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 14 November 2012 - 05:25 PM

Hi Yeison, Are you using the 4.1.1 beta 1 firmware on your board? In MFDeploy, no devices are appearing in the devices pulldown menu. This typically means that either (a) the drivers are not loaded; (B) the board's deployment port has been switched to serial; © the computer needs rebooting; (d) the usb peripheral has been turned off; (e) the board has been erased; (f) the board is not booting. Did you try holding down the pushbutton and then powering the board by plugging it in via USB? This will put it in bootloader mode. Chris

#43 Yeison

Yeison

    New Member

  • Members
  • Pip
  • 5 posts

Posted 15 November 2012 - 11:46 PM


Did you try holding down the pushbutton and then powering the board by plugging it in via USB? This will put it in bootloader mode.


If I tried that but like in Device Manager does not recognize the netduino plus.

Thanks.

#44 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 16 November 2012 - 02:22 AM

Hi Yeison, Have you installed the latest Netduino SDK? If so, please try erasing and re-flashing your Netduino Plus. The instructions are in the firmware download post (sticky at the top of the forum). Chris

#45 donnmo

donnmo

    Member

  • Members
  • PipPip
  • 28 posts
  • LocationSpokane area

Posted 05 March 2013 - 04:56 PM

Chris,

 

You'd mentioned in your October 23rd post that you had another HID sample in the works for this winter. Has that sample been posted? (And, if not, do you need a tester? I'd be glad to volunteer to take a look.)

 

Thanks!

--Donn



#46 donnmo

donnmo

    Member

  • Members
  • PipPip
  • 28 posts
  • LocationSpokane area

Posted 24 June 2013 - 05:08 PM

Chris,

 

I just had a chance to dive back into this work and took a look at the USB HID sample that you cite (above). This looks like it's exactly what I needed (your report descriptor contains both an input and output report and your code handles the two-way communications).

 

Thanks!

--Donn






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.