Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

Ham Radio Repeater Controller

repeater

  • Please log in to reply
1 reply to this topic

#1 vader7071

vader7071

    Advanced Member

  • Members
  • PipPipPip
  • 132 posts
  • LocationDothan, AL

Posted 16 June 2016 - 12:29 AM

I am interested in making a repeater controller for my ham radio gear,

 

I have a Netduino 1.  The way this woks, I will have 2 radios connected to this "controller".  Radio 1 and Radio 2

 

When radio 1 receives a signal, the controller will key up the transmit on radio 2 and the audio from radio 1 will be sent into the "mic" of radio 2.

 

Then when radio 2 receives a signal, the controller will key up the transmit on radio 1 and the audio from radio 2 will be sent into the "mic" of radio 1.

 

There are more safeties and controls that need to be added, but that is the general premise.  Has anyone tried this before? 



#2 vader7071

vader7071

    Advanced Member

  • Members
  • PipPipPip
  • 132 posts
  • LocationDothan, AL

Posted 16 June 2016 - 01:36 AM

https://openrepeater...Diagram-WIP.jpg

 

The link is to an image for making a controller using a Pi and the hardware setup.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.