Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

Netduino 3 Wifi nRF24L01 Xively Home Monitoring Gateway

nRF24L01 wifi arduino devDuino

  • Please log in to reply
No replies to this topic

#1 KiwiDev

KiwiDev

    Advanced Member

  • Members
  • PipPipPip
  • 100 posts
  • LocationNew Zealand

Posted 08 July 2015 - 11:17 AM

Hi all,

 

Currently I'm plotting the temperature & humidity of the 3 bedrooms in our house on Xively using a selection of Arduino, devDuino & Netduino devices connected using nRF24L01 wireless modules.

 

The power consumption data feed is coming, the code is finished, I have just got to install the sensor on the main feed from the street but it's mid winter here and it's sleeting outside so I am not in a hurry.

 

The *duino devices upload sensor data to the Netduino 3 Wifi which is equipped with an nRF24L01 shield from 

Embedded Coolness.  

 

The Arduino Uno R3 device also uses an Embedded Coolness shield. 

 

The devDuino V1.3, V2 & V3 devices have on-board nRF24L01 connectivity.

 

The temperature and humidity sensors are all Silicon Labs Si7005 devices so the results are consistent.

 

The power consumption monitor is Netduino based and using a devicter Energy Monitoring Shield which I have modified to work with 3v3 Netduino devices. For more detail about how to program the energy monitor shield see these posts about the Nokia 5110 display, nrf24L01 wireless link, and non invasive current sensor algorithm optimisations.

 

The Netduino 3 Wifi ran for a week without stopping, and would have gone for longer but I had to update the software.

 

All the configuration is stored on the MicroSD card so a gateway can be configured with MFDeploy and a text editor (I was looking at putting the network settings on the MIcroSD card as well if possible).

 

Next deployment will be using a Netduino 2 Plus and the new TCP-IP stack

 

For more info see http://blog.devmobil...f24l01-gateway/

 

Bryn

@KiwiBryn

Attached Files







Also tagged with one or more of these keywords: nRF24L01, wifi, arduino, devDuino

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.