Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

Netduino Plus 2 Bootloader

netduino plus 2

  • Please log in to reply
1 reply to this topic

#1 Alanarf

Alanarf

    New Member

  • Members
  • Pip
  • 1 posts

Posted 08 March 2015 - 10:43 PM

Hello,

I fully reset my netduino plus2, to reinstall the tinyBooter. I don't know why but, the netduino stop to work when I use SAM-BA  to select  the serial port.

At the beginning, my netduino was not recognized by the computer when in bootloader mode, the tinyBooter was never showed in MFDeploy. Only when I do not press the pushbutton, that MFDeploy show tinyCLR, so I fully reset, hoping to fix it, but all was wrong.

So now, when I try to emulate a COM port to the board stop to communicate with computer, and nothing appear on  MFDeploy or SAM-BA.

Someone could help me?

Thank you, :)



#2 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 09 March 2015 - 01:09 AM

Hi Alan,

Use Netduino Update to update your gen2 board. [Or use ST's tools.] SAM-BA was the process for the original gen1 gear.

Here's a link to the production 4.2.2 firmware:
http://forums.netdui...-v422-update-2/

You can also grab the 4.3.1 firmware which comes with Netduino Update via the sticky post at the top of this forum.

Does that get you up and running.

Welcome to the Netduino community,

Chris





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.