Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

.net MF on 32F429IDISCOVERY


  • Please log in to reply
23 replies to this topic

#1 beastyboy

beastyboy

    Advanced Member

  • Members
  • PipPipPip
  • 194 posts
  • LocationNetherlands

Posted 20 August 2014 - 07:06 PM

While I was getting bored with my Go I came along this little bugger:

 

http://www.st.com/we...SS1532/PF259090

 

Anyone have experience with these running .net MF?

 

Cheers Olaf


Van SchOten Ict Diensten en Services
http://www.voids.nl


#2 zeroaviation

zeroaviation

    Member

  • Members
  • PipPip
  • 28 posts

Posted 20 August 2014 - 07:11 PM

ST has a setup already out there http://www.st.com/we.../tools/PF260087

 

However, its closed source :/ I hope either they release the source, or someone builds their own.

 

Cheers,

-Matt



#3 beastyboy

beastyboy

    Advanced Member

  • Members
  • PipPipPip
  • 194 posts
  • LocationNetherlands

Posted 20 August 2014 - 07:14 PM

Hi Matt,

 

Yes I know I was just hoping someone was already hacking away with it ;)

So we could share some experiences and if its at all interesting to get one.

 

Cheers,

Olaf


Van SchOten Ict Diensten en Services
http://www.voids.nl


#4 Juzzer

Juzzer

    Advanced Member

  • Members
  • PipPipPip
  • 135 posts
  • LocationHertfordshire, UK

Posted 21 August 2014 - 06:33 AM

@Olaf - you should have asked at the workshop...i have been playing with one for 9 months+ thanks to our Swiss magicians :)

#5 beastyboy

beastyboy

    Advanced Member

  • Members
  • PipPipPip
  • 194 posts
  • LocationNetherlands

Posted 21 August 2014 - 09:07 AM

Hi Justin,

 

Yes sure, but I just found that little thing on mouser not knowing you obviously had been abusing it lol..

 

Cheers,

Olaf

 

ps: I am ordering one now from mouser.


Van SchOten Ict Diensten en Services
http://www.voids.nl


#6 zeroaviation

zeroaviation

    Member

  • Members
  • PipPip
  • 28 posts

Posted 21 August 2014 - 02:35 PM

@Olaf - you should have asked at the workshop...i have been playing with one for 9 months+ thanks to our Swiss magicians :)

 

Could you share what you guys have?

 

Cheers,

-Matt



#7 piwi

piwi

    Advanced Member

  • Members
  • PipPipPip
  • 114 posts
  • LocationGermany

Posted 21 August 2014 - 06:30 PM

I have one laying around ... see how it works with .net ... should be not that difficult ... I'll share my experiences here as well ...



#8 piwi

piwi

    Advanced Member

  • Members
  • PipPipPip
  • 114 posts
  • LocationGermany

Posted 21 August 2014 - 07:36 PM

well so far so good ....

 

20140821_212518_zpsc4f8c054.jpg



#9 piwi

piwi

    Advanced Member

  • Members
  • PipPipPip
  • 114 posts
  • LocationGermany

Posted 21 August 2014 - 08:07 PM

blast the usb driver refuses to install because of missing digital signature

 

anyone ???



#10 Juzzer

Juzzer

    Advanced Member

  • Members
  • PipPipPip
  • 135 posts
  • LocationHertfordshire, UK

Posted 21 August 2014 - 08:15 PM

Turn off digital signing?

#11 piwi

piwi

    Advanced Member

  • Members
  • PipPipPip
  • 114 posts
  • LocationGermany

Posted 21 August 2014 - 08:23 PM

 Got this now ??

 

USBDrivererror_zpsfa07d7fe.jpg



#12 piwi

piwi

    Advanced Member

  • Members
  • PipPipPip
  • 114 posts
  • LocationGermany

Posted 21 August 2014 - 08:50 PM

thx 2 juzzer's tip got to switch off the digital signing ... the driver installed now and even recognized the device ...

 

but blooming vs2012 does not see it for deploying ... no usb recognized device as .netmf deployable devices at all ...

 

any ideas left ??? 

 

well thinking about it ... I'd might check if mfdeploy has somthing to say ... maybe just the bootloader is on not the rest ... give me a minute ... or so ...



#13 piwi

piwi

    Advanced Member

  • Members
  • PipPipPip
  • 114 posts
  • LocationGermany

Posted 21 August 2014 - 10:10 PM

this is going not so well ...

 

using the st-link to open the hex files and program to flash ... 

 

1. Tinybooter.hex

2. er_flash.hex

3. er_congfig.hex

 

but stil no recognition and deploy in VS2012. 

 

doing only point 1 & 2 I get the following result in mfdeploy when doing device caps:

Pinging... HalSystemInfo.halVersion:               4.3.0.0
HalSystemInfo.halVendorInfo:            Copyright Oberon microsystems, Inc.
HalSystemInfo.oemCode:                  255
HalSystemInfo.modelCode:                0
HalSystemInfo.skuCode:                  65535
HalSystemInfo.moduleSerialNumber:       FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
HalSystemInfo.systemSerialNumber:       FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
ClrInfo.clrVersion:                     4.3.0.0
ClrInfo.clrVendorInfo:                  Copyright Oberon microsystems, Inc.
ClrInfo.targetFrameworkVersion:         4.3.0.0
SolutionReleaseInfo.solutionVersion:    4.3.0.0
SolutionReleaseInfo.solutionVendorInfo: STMicroelectronics
SoftwareVersion.BuildDate:              Sep 25 2013
SoftwareVersion.CompilerVersion:        410713
FloatingPoint:                          True
SourceLevelDebugging:                   True
ThreadCreateEx:                         True
LCD.Width:                              240
LCD.Height:                             320
LCD.BitsPerPixel:                       16
AppDomains:                             True
ExceptionFilters:                       True
IncrementalDeployment:                  True
SoftReboot:                             True
Profiling:                              False
ProfilingAllocations:                   False
ProfilingCalls:                         False
IsUnknown:                              False

but after doing nr 3. the green/red led stop flashing and all is beyond recognition, in mfdeploy as well as vs 

 

this behavior is the same when I turn off/disconnect the device from USB and reconnect. It is recognized by USB but won't do any in neither mfdeploy nor vs. 



#14 piwi

piwi

    Advanced Member

  • Members
  • PipPipPip
  • 114 posts
  • LocationGermany

Posted 21 August 2014 - 11:44 PM

wooohaaa .... running ... don't ask me why ... probably when I power down the pc the next time it won't work .... this was an adventure ... I even managed to give the device a new usb name ... of course after that I had a breaking issue so I went back to the st-link utility and set the name bytes to hex 00 and the original usb name came up again. Back to VS, started deploying only to figure out you can not mixed netmf versions, so had to uninstall 4.3.1.0 and install 4.3.0.0 since the ST is on that and voila there we go it deployed and ran almost faster then I could blink but instead the LEDs did so we have a nice running a little blinky led and empty screen program on a not so stable disco board:

 

Blinky_zps6c15dec5.jpg



#15 zeroaviation

zeroaviation

    Member

  • Members
  • PipPip
  • 28 posts

Posted 25 August 2014 - 02:40 PM

@piwi

 

Are you running the STM port?

 

Cheers,

-Matt



#16 zeroaviation

zeroaviation

    Member

  • Members
  • PipPip
  • 28 posts

Posted 25 August 2014 - 02:40 PM

Double post. 


Edited by zeroaviation, 25 August 2014 - 02:40 PM.


#17 Juzzer

Juzzer

    Advanced Member

  • Members
  • PipPipPip
  • 135 posts
  • LocationHertfordshire, UK

Posted 25 August 2014 - 02:43 PM

ST port..

 



#18 Juzzer

Juzzer

    Advanced Member

  • Members
  • PipPipPip
  • 135 posts
  • LocationHertfordshire, UK

Posted 25 August 2014 - 02:46 PM

Oberon port :)

 

Free-ram.jpg



#19 piwi

piwi

    Advanced Member

  • Members
  • PipPipPip
  • 114 posts
  • LocationGermany

Posted 25 August 2014 - 02:49 PM

@piwi

 

Are you running the STM port?

 

Cheers,

-Matt

if you mean the one from the ST web site .... Yes !!! 

 

1:1 Unchanged and still on NetMF 4.3.0.0 ... 



#20 piwi

piwi

    Advanced Member

  • Members
  • PipPipPip
  • 114 posts
  • LocationGermany

Posted 25 August 2014 - 02:52 PM

@Juzzer, are you using the STM32F429I Discovery board as well ?






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.