Can I use two Shield Base modules on the Netduino Go? If not, will I be able to later on?
2x Shield Base modules on the Netduino Go?
Started by Robert Hugo, Jun 28 2014 03:14 PM
4 replies to this topic
#2
Nevyn
-
- Members
-
- 1072 posts
Advanced Member
- LocationNorth Yorkshire, UK
Posted 28 June 2014 - 04:54 PM
Can I use two Shield Base modules on the Netduino Go? If not, will I be able to later on?
At the moment this is not possible but previous posts have stated that multiple ShieldBase support will be added in the future. See this post:
http://forums.netdui...beta-6/?p=44239
Regards,
Mark
To be or not to be = 0xFF
Blogging about Netduino, .NET, STM8S and STM32 and generally waffling on about life
Follow @nevynuk on Twitter
#3
Robert Hugo
-
- Members
-
- 35 posts
Advanced Member
Posted 28 June 2014 - 09:21 PM
Since that's from a while back 
I am putting in a "nag" for a bit of an update! 
#4
beastyboy
-
- Members
-
- 194 posts
Advanced Member
- LocationNetherlands
Posted 06 July 2014 - 06:52 PM
Hi Robert,
I thought I was the nagging guy here lol ..
So let us wait for Chris, they are working on some modules to be released in a couple of weeks.
Let see if Chris already knows some more about a possible date 
Cheers Olaf
Van SchOten Ict Diensten en Services
http://www.voids.nl
#5
beastyboy
-
- Members
-
- 194 posts
Advanced Member
- LocationNetherlands
Posted 13 August 2014 - 01:58 PM
Ding dong any news ?
Cheers
Olaf
Van SchOten Ict Diensten en Services
http://www.voids.nl
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
