Hi guys, I received my Netduino Mini today, and have some trouble getting it to work.
First some information about my setup;
- I've already got Netduino 2 and Netduino Plus 2 working using the 4.3 version.
- Using Microsoft Visual Studio 2013 on Windows 8.1.
- I've got this cable - an FTDI Cable 5V VCC-3.3V I/O.
My wireing is like this:
Cable Black => Pin 23
Cable Red => Pin 21
Cable Orange => Pin 12
Cable Yellow => Pin 11
Cable Brown => (not connected)
Cable Green => (not connected)
Pin 17 is connected to a blue LED, then a resistor and then back to ground on pin 23.
The cable shows up in Device Manager as COM3.
Using Putty I've opened a connection to COM3, and the first time I could press ESC and I then choose 1. I could see debug data flashing by. In Visual Studio I selected serial as the transport.
Then my computer froze.
Rebooted and fired up putty. This time nothing happened when pressing ESC. Pulled the power from Pin21, and put it back. Saw some debugtext in Putty, before my computer froze again.
Now I've opened up MFDeploy from the v4.3 folder, and try to ping serial COM3, but it says "NoConnection".
Any idea what's going on here?