Best Answer NooM, 02 December 2013 - 06:55 PM
netduino 2 doesent have an erase pad 
you have to delete it when its in dfu mode via dfuse.
Go to the full post
Strange "hanging" netduino 2
Started by luc-winters, Dec 02 2013 06:52 PM
2 replies to this topic
#1
luc-winters
-
- Members
-
- 4 posts
New Member
Posted 02 December 2013 - 06:52 PM
Hi All,
after a failing deploy , my netduino 2 is hanging, maybe someone knows how to get it back working.
i checked all topics (and tried most of the solutions) on "not recognized" "bricked" but no luck.
Netduino2 is visible in mfdeploy, but when i try to ping or erase device is not recognized..
in device manager it is visible as netduino or STM device in dfu mode.
tried to erase bootloader, with the 3,3v to the pad, nothing happens, still my pc sees the netduino, so i can't use sam-ba also.
i also have a netduino1, this device is working fine on the same system...
i am working on a windows8 pc, but as i say, the netduino 1 works fine.
#2
NooM
-
- Members
-
- 490 posts
Advanced Member
- LocationAustria
Posted 02 December 2013 - 06:55 PM Best Answer
netduino 2 doesent have an erase pad
you have to delete it when its in dfu mode via dfuse.
#3
luc-winters
-
- Members
-
- 4 posts
New Member
Posted 02 December 2013 - 07:10 PM
Thanks!!, this clears up some things.
i will check the wiki pages and try this.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
