![Photo](http://forums.netduino.com/uploads/av-415.jpg?_r=0)
Anyone interested in an eagle version of the Netduino files?
#1
Posted 26 September 2010 - 09:20 AM
- Henrique likes this
#2
Posted 26 September 2010 - 10:16 AM
#3
Posted 26 September 2010 - 10:28 AM
#4
Posted 26 September 2010 - 04:00 PM
Great idea, thanks to work on it ... Very interested for Netduino Plus ...
Pascal
Put my name on the list !
#5
Posted 26 September 2010 - 04:40 PM
#6
Posted 26 September 2010 - 06:45 PM
I presume people wants the Eagle file so they can make their own boards.I've seen a couple of threads about the board and schematic files and people wanting them in Eagle, is anyone interested? I'll port them over if there is enough interest - i have an Eagle Pro license so the 4 layer restriction is no problem to me.
I have a feeling i'd have to do a redraw from scratch, so the routing will be different however components should mostly be in the same place (all the important stuff anyway) - it would be enough for using to generate your own netduino based devices in any case.
Are there a non surface mount versions of the chips used by the Netduino and Netduino Plus? I would love to build my own Netduino board, but I do not have the robotic nerves of steel to solder those surface mount components.
![Posted Image](http://forums.netduino.com/public/style_emoticons/default/sad.gif)
![Posted Image](http://www.tekhari.com/netduino/img/SurfaceMounts.jpg)
#7
Posted 26 September 2010 - 07:05 PM
#8
Posted 26 September 2010 - 07:07 PM
i might have to do a tutorial on how to solder it.
I'd love to see a tutorial on surface mount soldering...
Today LED's, tomorrow, the world!!! Well, OK, maybe servos.
#9
Posted 26 September 2010 - 07:09 PM
There are heaps of them on YouTube, but i'll see what i can do once i get the domino and usbizi chip inI'd love to see a tutorial on surface mount soldering...
![;)](http://forums.netduino.com/public/style_emoticons/default/wink.png)
#10
Posted 26 September 2010 - 07:49 PM
Hari, with 100 pins there is no way you'd get that in anything other than LQFP/TFBGA/LQFN packages. Those IC's are really easy to hand solder once you know a few tricks. I have a FEZ Domino on it's way to me with a dead NXP ARM7 on it, and a replacement ARM chip, i might have to do a tutorial on how to solder it.
0603's and above are easy with a pair of surface mount tweasers. If you're really worried about the board, get one made at PCBCart.com, then head over to SMTStencil.com and get a stencil made. Buy some solder paste, stencil on the solder paste, place your parts with surface mount (self closing) tweasers and then heat with a hot air gun slowly until the solder goes all liquid.
Surface mount isn't something to be afraid of, i only first got PTH parts after getting a FEZ Domino and a Sparkfun Inventors Kit... I've been doing surface mount only boards for 4 years - it's what i learnt on.
Have been soldering surface mount for a year now, all with just a normal soldering iron. I now ordered some FEZ Domino pcb's and some of those 144 pins LQFP ARM7 chips, I have to say I'm not really sure what the best way is to solder those things. I have no problems with any other parts so far, but this is going to be a challange I guess. I have recently bought a Aoyue 968 hot air soldering station and I hope I can use that thing on those chips.. or do you think hand soldering is still the best way?
#11
Posted 26 September 2010 - 10:35 PM
Here's one: http://www.sparkfun....utorials_id=107I'd love to see a tutorial on surface mount soldering...
I've never tried but it doesn't look as scary as I thought it would be.
#12
Posted 27 September 2010 - 04:23 AM
#13
Posted 11 October 2010 - 06:27 AM
![:(](http://forums.netduino.com/public/style_emoticons/default/sad.png)
#14
Posted 24 January 2011 - 02:51 PM
#15
Posted 01 February 2011 - 06:21 PM
#16
Posted 07 February 2011 - 08:15 PM
![:)](http://forums.netduino.com/public/style_emoticons/default/smile.png)
Attached Files
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users