Device has old or unsupported configuration
#1
Posted 26 August 2011 - 11:33 AM
#2
Posted 26 August 2011 - 11:59 AM
#3
Posted 26 August 2011 - 01:29 PM
I have tried rebooting, unplugging, erasing, holding the SW1 while connecting the N+.
I can deploy programs to the N+ with VS2010 but i just cant configure anything. And now it also seems i cant flash it either.
Getting "Error: No response from device" error.
Hope you can help. Have had the NetDuino plus for only 1 day
Hi oddmar,
That's a very curious error. Have you tried rebooting your computer, unplugging/re-attaching your Netduino Plus, etc.?
Two other things to try:
1. Try reflashing the firmware (or upgrade to the new .NET MF 4.2 RC1).
2. Try reflashing just the ER_CONFIG file from the firmware.
Does that help?
Welcome to the Netduino community,
Chris
Attached Files
#4
Posted 26 August 2011 - 01:53 PM
#5
Posted 26 August 2011 - 02:26 PM
#6
Posted 26 August 2011 - 03:15 PM
#7
Posted 26 August 2011 - 03:19 PM
It's possible, but not a big chance its done by accident. See http://wiki.netduino...ep-by-step.ashx for instructions to remove and reflash the tinybootloader.Any chance the TinyBooter can be erased ?
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
#8
Posted 26 August 2011 - 04:28 PM
It's possible, but not a big chance its done by accident. See http://wiki.netduino...ep-by-step.ashx for instructions to remove and reflash the tinybootloader.
I give up. the samba says no board when i start it, and when i select the correct board "at91sam7x512-ex" it fails with something like unknown ID
GREAT !
#9
Posted 26 August 2011 - 06:18 PM
Don't give up too soon...I give up. the samba says no board when i start it, and when i select the correct board "at91sam7x512-ex" it fails with something like unknown ID
GREAT !
That message you get from SAM-BA, you get when there still is a tinybootloader present. So did you actually erase it?
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
#10
Posted 26 August 2011 - 07:30 PM
Don't give up too soon...
That message you get from SAM-BA, you get when there still is a tinybootloader present. So did you actually erase it?
Finally it worked.
I switched to a Windows 7 32 bit and tried again. Seemed to help. bootloader installed and flashing 4.1.0.6 now.
Thanx guys
#11
Posted 26 August 2011 - 09:22 PM
Glad to read that! Luckely you didn't gave up on it yetFinally it worked.
I switched to a Windows 7 32 bit and tried again. Seemed to help. bootloader installed and flashing 4.1.0.6 now.
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users