Fails Ping with MFdeploy right out of the box
Started by tel001, Aug 07 2011 11:15 PM
3 replies to this topic
#1
Posted 07 August 2011 - 11:15 PM
-MFdeploy finds it on USB as NetduinoPlus_NetduinoPlus
-Under Device Manager->USB Controllers it IDs as Netduino...Device is Working properly
-I did a remove the add driver
-Reset process seems to be OK and the Network lights flash on boot like they should
I have Flashed devices in the past so I'm willing to try, but even MFdeploy won't connect to allow me to try that :-)
I assume there's a backdoor way to re-flash it?
I'm doing a Widows Update on my Vista 32 bit machine ... But I can format and put XP on a machine if that would help.
Thanks for your help.
Attached is a screen capture of my settings....
#2
Posted 08 August 2011 - 12:28 AM
Hi tel000,
If you hold down the pushbutton while plugging in your Netduino, it will put it into "bootloader" mode for about 5 seconds.
Really quick...try doing this, and then immediately press PING from MFDeploy. Can it see the Netduino Plus now?
Chris
#3
Posted 08 August 2011 - 05:01 AM
Hi Chris.Hi tel000,
If you hold down the pushbutton while plugging in your Netduino, it will put it into "bootloader" mode for about 5 seconds.
Really quick...try doing this, and then immediately press PING from MFDeploy. Can it see the Netduino Plus now?
Chris
Thanks for that...I'm running windows downgrader and dumping my messy Vista for now...
I'll do that once I have a clean machine
#4
Posted 08 August 2011 - 09:46 AM
I'm now running XP with all the current Updates...Hm Blinky is Blinkin fine Now the netdiction sets in! :-))))
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users