Create your own Netduino Project Box
#1
Posted 16 June 2011 - 07:35 PM
I'll making an overlay so you can print an A4, unfold the box, cut out gaps, refold the box, and you're done.
It's a bit in the same spirit of these ASUS motherboard boxes:
If you didn't got a small box with your Netduino, don't wurry. I'm going to do the same with the red sparkfun box as well later
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
#2
Posted 16 June 2011 - 07:42 PM
#3
Posted 16 June 2011 - 10:48 PM
View my blog at ChrisHammond.com
Projects: Netduino Tank/Tracked Vehicle, DNNFoos, Random other bits
#4
Posted 17 June 2011 - 04:29 PM
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
#5
Posted 17 June 2011 - 08:23 PM
How cool is that?Great news, I just had some contact with Sparkfun.
They're going to send me a box in every size they have, so I can make samples for all their boxes as well!
Wait--do you have a Small Box and a Tiny Box?
Chris
#6
Posted 17 June 2011 - 09:00 PM
Only a blue "small box". You have my address, right?Wait--do you have a Small Box and a Tiny Box?
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
#7
Posted 18 June 2011 - 02:54 PM
Today LED's, tomorrow, the world!!! Well, OK, maybe servos.
#8
Posted 18 June 2011 - 05:46 PM
- the cardboard box
- 3 bolts and screws
- the overlay (will become a PDF document for each kind of box)
- a utility knife
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
#9
Posted 07 May 2012 - 08:00 PM
- the overlay (will become a PDF document for each kind of box)
Any update on this?
#10
Posted 07 May 2012 - 09:35 PM
Ohhh you got me! That's an old project that died silently!Any update on this?
Sorry, I haven't finished it yet. But hopefully it can inspire you?
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users