Best Answer woof_woof_bark_bark, 05 August 2014 - 11:25 AM
Thanks for the reply, I don't know what I did between my multiple attempts to get the board working, but suddenly after plugging it one of the many times it just worked and now I got the firmware updated to 4.3.1.
Being new to this board, I do have one question. I'm working on this project that seems to be wrong, and after trying to put it on my board I found that when I went back to trying to but previously working programs on my board I get the error "An error has occurred. Please check your hardware." While reading the forums I thought the way to fix this would be to plug/unplug the netduino and then erase using MFDeploy. However, when I click erase after all this, nothing shows up that can be erased.
The only solution I've found to get the board working again is to reinstall the firmware, and I don't think that I should have to be doing that. Any Ideas what might be going on or what I might be doing wrong (besides writing a code that doesn't work)?
Go to the full post